chrisgugl.blogg.se - Bogart battery monitor

BOGART BATTERY MONITOR GENERATOR
BOGART BATTERY MONITOR SOFTWARE
BOGART BATTERY MONITOR PC

For example one channel can be used to keep track of battery system energy content and the two remaining ones can be used for separate measurement of two charging sources, such as total solar or wind production. There are many different ways these can be used. Or battery voltage, plus the solar array voltage if you have a peak power point tracking controller.Īmps: (3 channels) ±.01-200 Amps (with 100A/100mV shunt).± 0.1-1000 Amps (with 500A/50mV shunt) Each of these requires a separate shunt. For example you can monitor volts from two battery systems.

Audible and visual alarms for high and low battery conditions.

BOGART BATTERY MONITOR GENERATOR

Relay output to control generator or external alarm.Access the data with display unit (shown) with LCD display and buttons up to 1000 feet from batteries.Monitor up to 3 shunts-For example: measure total solar input and wind input independently in addition to monitoring battery "state of charge".System efficiency (ratio of amp hours charged to amp hours discharged for each charge cycle) is regularly logged. It can log data that can be imported to a spreadsheet and graphed to analyze performance and diagnose system problems.

BOGART BATTERY MONITOR SOFTWARE

It has a optional computer interface with (Windows) software that can control and read data on a local computer, or also over the internet.

Watts, watt hours and amp hours are also measured.

With one battery system, battery current plus two charging current sources can be separately measured.

It measures 1 or 2 battery systems with a common negative.

The PentaMetric would be the choice for doing system data analysis utilizing a computer. The new PentaMetric battery monitor system offers a lot more capability than the TriMetric monitor. Please Note: Data may be simultaneously accessed and controlled using the Display Unit and/or any one of the three computer interface options.

PM-101-CE Ethernet Computer Interface: optional Ethernet/internet computer interface with software to control and read out all data.PM-102-C-USB USB Computer Interface: optional USB computer interface with software to control and read out all data.

PM-100-C Computer Interface: optional RS232 computer interface with software to control and read out all data.Computer Interface Unit - choose 1 of 3 optional interfaces to read output data.PentaMetric Display Unit (PM-100-D) - optional readout unit with LCD display and control buttons (wired connection up to 1000').PentaMetric Input Unit (PM-5000-U) - Used to collect, process and log data (near batteries).The PentaMetric Battery Monitoring System consists of 3 Possible Components (each ordered separately):

BOGART BATTERY MONITOR PC

The PM-100-C PentaMetric Computer Interface is used in conjunction with the PentaMetric monitor, allowing you to download data to your PC and additional features that can't be done with the PentaMetric monitor alone.